How Much Coating Do Your Work Gloves Really Need?
Why do some coated work gloves have black palms, while others are coated almost to the wrist? And why can two gloves both be called “nitrile dipped” yet feel completely different? The answer is that dipping describes more than one feature.
When comparing dipped gloves, ask four questions: Where is the coating? (coverage), How many layers? (single or double dip), What is it made of? (nitrile, PU, latex, PVC), and What does the surface feel like? (smooth, foam, sandy or crinkle). These choices affect grip, comfort and protection differently.
1. Coating Coverage: How Much of the Glove Is Dipped?
This is the first difference you can usually spot by looking at a glove. Most dipped work gloves start with a knitted liner, then receive a polymer coating over selected parts of the hand. To distinguish the three designs, compare the back of the glove: all three typically have coating on the palm, but their dorsal coverage differs.
Coats the palm and finger gripping surfaces; much of the back remains knitted.
Extends over more of the fingers and knuckles, leaving some back-of-hand ventilation.
Covers the palm, fingers and back of hand—typically up to the cuff area.
Coverage symbols are conceptual, not literal glove outlines. Exact dipping boundaries vary by manufacturer.
| Dipping coverage | Typical advantage | Main trade-off | Example tasks |
|---|---|---|---|
| Palm-coated | Grip where objects are held; exposed knit back often helps ventilation | Uncoated areas lack a continuous liquid barrier | Packing, assembly, sorting |
| ¾ dipped | Extra coverage around fingers and knuckles | Still has exposed knit; may feel warmer | Some oily handling and general maintenance |
| Fully coated | More complete coating coverage around the hand | Often less airflow; coating and cuff must be assessed for liquid exposure | Selected wet, messy and abrasive tasks |
A real-world example: Ansell lists its HyFlex 11-842 as palm dipped. Its HyFlex 11-926 uses ¾-dip geometry and double nitrile coating. These are distinct design choices.
2. Single Dip vs. Double Dip: How Many Coating Layers?
Coverage tells you where the coating goes. Layer count tells you how the coating is built. A glove can be ¾ dipped and double coated, or fully dipped with an additional palm coating. The words are not interchangeable.
Simplified schematic. Actual layer thickness and coverage may differ; the second coating does not always cover the same area as the first.
Manufacturers sometimes apply a more continuous first coating for oil or water repellency, followed by a textured palm finish for grip. For example, SHOWA S-TEX 377 combines a full nitrile coating with an additional foam nitrile palm dip. uvex's XG20 uses a multilayer nitrile design.
Does double dipping always mean better? No. Additional layers may improve specific grip, coverage or wear characteristics, but can change flexibility, thickness and cost. Look at the manufacturer's test results and try the glove on the actual task.
3. Dipped Material: Nitrile, PU, Latex or PVC?
“Dipped” doesn't tell you which polymer is used. The material influences feel and how a coating behaves in different environments.
| Material | What it's often selected for | Check before use |
|---|---|---|
| Nitrile | General handling, abrasion, selected oily tasks | Coating texture, oil exposure and liquid permeability |
| PU | Thin grip and precision handling | Wet/oily conditions and abrasion needs |
| Latex | Flexible grip with rough or damp materials | Allergy concerns and oil exposure |
| PVC | Some wet or messy handling tasks | Bulk, dexterity and verified liquid protection |
For a deeper material comparison, read our existing guide to nitrile, PU, latex and PVC coated gloves.
4. Surface Finish: Smooth, Foam, Sandy or Crinkle?
Two gloves can have the same nitrile coating material and the same palm coverage but still grip differently. A finish is not another coverage category.
More continuous-feeling surface; compare grip and liquid repellency.
Fine-textured feel, often flexible; check saturation and breathability.
Grainier finish; compare actual wet and oily grip.
Raised texture, common with latex for handling rough materials.
As a real example, uvex unilite 6605 uses breathable foam nitrile over the palm and fingertips for fine work, while Ansell RINGERS R068 combines a full nitrile dip with an additional sandy-finish palm area.
5. Choose a Dipping Design Based on the Job
| Your task | What to compare first | Why |
|---|---|---|
| Sorting cartons or small parts | Palm-dipped PU or microfoam nitrile | Grip and finger feel with ventilation at the back |
| Handling lightly oily components | ¾ dip or suitable double-coating designs | More knuckle coverage and task-specific oily grip |
| Working in wet or messy conditions | Full dip with suitable construction | More coated coverage; confirm liquid limits |
| Repeated handling of wet or oily objects | Test textured second-dip finishes | Grip can differ substantially between finishes |
Safety note: if sharp edges, hazardous chemicals, heat or moving equipment are involved, do a hazard assessment before choosing gloves. Coating coverage alone never guarantees protection.
6. Three Myths About Dipped Work Gloves
Myth: “Fully dipped means chemical-resistant.” A fully coated knit glove is not necessarily chemical PPE. Confirm the exact chemical, duration, coating construction and relevant testing.
Myth: “Double-dipped means twice the protection.” Two layers do not imply twice the test rating. Layers can serve different purposes, and the finished glove must be evaluated.
Myth: “More coating is always better.” More coverage may limit airflow and feel warmer. The right balance depends on the hazards and how much precision the worker needs.
Quick FAQs
Are palm-dipped gloves waterproof?
No. Their uncoated knitted backs allow moisture to reach the skin. Even a coated palm may not be liquid-tight if its finish is porous.
Is a ¾-dipped glove the same as a double-dipped glove?
No. ¾ describes coating coverage, while double dip describes two coating applications or layers. A glove can be both.
Why do some double-dipped gloves have a rougher palm?
The second dip may use a different formulation or textured finish designed to improve grip. Check product-specific descriptions and test data.
Does full dipping always reduce breathability?
It often covers more of the knitted surface, limiting direct airflow. But comfort also depends on the coating technology, liner, fit and work conditions.
The Bottom Line
Think of dipped-glove design as four separate decisions: coverage, number of layers, coating material and surface finish. A glove that's right for warehouse picking may be a poor choice for oily metalwork or constant liquid contact. Choose from the actual task and tested protection—not from the word “dipped” alone.
Professional References & Further Reading
Liberty Safety — Coated Seamless Gloves: Palm, ¾, Full and Double Dip
Ansell — HyFlex 11-842 (Palm-Dipped Example)
Ansell — Industrial Glove Product Solution Guide (HyFlex 11-926)
SHOWA — S-TEX 377 (Full Dip Plus Foam Palm)
uvex — profi ergo XG20 (Multilayer Nitrile)
uvex — unilite 6605 (Foam Nitrile Palm)